How to Descale Your De’Longhi Magnifica S ECAM 22.110 Coffee Machine?

Your Magnifica S, require regular cleaning and descaling to maintain it in perfect condition, but don’t worry! The machine tells you when it’s time to descale it by lighting up the “Descale” button under the control panel (Red light blinking ).

The descaling procedure takes around 45 minutes to complete, so be sure to have enough time to finish the process. We highly recommend using our descaling solution EcoDecalk.

It is important to use De’Longhi descaler only. Using an unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer's guarantee. 

Buy now De’Longhi EcoDecalk Discalers and other products for coffee machine maintenance

Watch this video to find out about how and when to descale your De'Longhi Magnifica S ECAM 22.110 bean-to-cup coffee machine or follow the StepByStep guide below. This process should be followed on models that can be descaled through the diffuser:

If your model needs to be descaled through the steam nozzle, please watch this video:

Step By Step Guide:

Important! Before use, read the instructions and the labelling on the descaler pack. 

If present, remove the Water Filter before descaling the appliance

Descaler could damage delicate surfaces. If the product is accidentally spilt, dry it immediately.

• Descale the appliance when the light on the control panel flashes. 

• Turn the machine on and wait until it is ready for use. 

• Empty the drip tray and grounds container and return both to their positions in the machine. 

• Empty the water tank and remove the water softener filter if present).

• Pour the descaler into the tank up to level A (corresponding to a 100ml pack) marked on the inner surface of the tank, then add a litre of water up to level B and put the water tank back in the appliance. 

• Place a container with a minimum capacity of 2 litres under the cappuccino maker and coffee spouts.

• Wait for the coffee lights to come on steadily.

• Press and hold the button for at least 5 seconds to confirm that you have added the solution and begin the descaling procedure. The light on the button comes on steadily to indicate that the descaling programme has begun. 

• The light flashes to indicate the hot water/steam dial must be turned to the I position