ESAM3500/ 4400/ 4500
|
1) unplug the unit 2) hold the medium and long espresso buttons and while holding them plug in the unit 3) unplug and plug back the unit. Now it tell you to select the language again
|
ESAM5500
|
1) Unplug the unit 2) Hold 2 cups and hot water buttons and while holding plug the unit 3) Unplug and plug back; the unit now it is asking to select the language
|
ESAM6600
|
1) Unplug the unit 2) Hold 1 short and 1 long coffee buttons and while holding plug the unit 3) Unplug and plug back; the unit now it is asking to select the language
|
ESAM6620
|
1) Turn off the unit by the main switch on the back 2) Hold 1 short and 1 long coffee buttons and while holding turn on the unit by the main switch on the back 3) Turn off and then turn back on; the unit now it is asking to select the language
|
ESAM6700
|
1) With unit in standby (plugged in but turned off) open the service door 2) Hold the “length of coffee”, “long” and “1 cup” buttons till the display shows “select test” 3) Close the door and push the “Latte” button; display shows “display test mode” 4) Unplug and plug back; the unit now it is asking to select the language
|
ESAM6900
|
1) With unit in standby (plugged in but turned off) open the service door 2) Hold the “length of coffee”, “cappuccino” and “1 cup” buttons till the display shows “select test” 3) Close the door and push the “Cappuccino” button; display shows “display test mode” 4) Unplug and plug back; the unit now it is asking to select the language
|
ECAM23450 / 23460/ 25462
|
1) Turn off the unit by the main switch on the back 2) Hold 2 cups and hot water buttons and while holding turn on the unit by the main switch on the back 3) Turn off and then turn back on; the unit now it is asking to select the language
|
ECAM26455/ 28465
|
1) With unit in standby (plugged in but turned off) pull out the drip tray 2) Hold the “length of coffee”, “Latte macchiato” and “1 cup” buttons till the display shows “select test” 3) Push the drip tray in and push the “Caffelatte” button; display shows “button” 4) Unplug and plug back; the unit now it is asking to select the language
|
ESAM5600
|
1) With unit in standby (plugged in but turned off) open the service door
2)Hold the “P”, “Rinse” and “1 cup” buttons till the display shows “select test”
3)Close the door and push the “Café latte” button; display shows “button”
4)Unplug and plug back; the unit now it is asking to select the language
|
ECAM45760
|
1) With unit in standby (plugged in but turned off) open the service door
2) Hold the “Hot water”, “Menu” and “1 cup” buttons till the display shows “select test”
3) Close the door and push the “Menu” button; display shows “Display test mode”
4)Unplug and plug back; the unit now it is asking to select the language
|
ECAM44660
|
1) With unit in standby (plugged in but turned off) open the service door
2) Hold the “Menu”, “Cappuccino” and “coffee beans” buttons till the display shows “select test”
3) Close the door and push the “1 Cup” button; display shows “button”
4)Unplug and plug back; the unit now it is asking to select the language
|
ECAM35020/ ECAM35025
|
1) With unit in standby (plugged in but turned off) pull out the drip tray 2) Hold the “short espresso button”, “Long espresso button”, “steam button” and “rinse button” till the display shows “select test”
3) Push the drip tray in and push the “Over-Ice” button ; display shows “Display Test button” 4) Unplug and plug back; the unit now it is asking to select the language
|
ECAM35075
|
1) With unit in standby (plugged in but turned off) pull out the drip tray 2) Hold the “Rinse”, “strength”, “Drink Menu” and “My Menu” till the display shows “select test”
3) Push the drip tray in and push the “Settings” button; display shows “Display Test button” 4) Unplug and plug back; the unit now it is asking to select the language
|
ECAM37095TI
|
1) With unit in standby (plugged in but turned off) pull out the drip tray 2) Hold the “Length”, “strength”, “Settings” and “Back” till the display shows “select test”
3) Push the drip tray in and push the “Test Display” 4) When the display it shows like this unplug and plug back; The unit now it is asking to select the language
|
ECAM46860
|
1) With unit in standby (plugged in but turned off) pull out the drip tray 2) Hold the “ESC”, “OK”, “MILK” and “LONG” till the display shows “select test” 3) Push the drip tray in and push "MY” 4) When the display it shows like this unplug and plug back
The unit now it is asking to select the language
|
|
|
|
|
|
|